_1.webp)
_2.webp)
_3.webp)
_4.webp)
_5.webp)
ACDelco GM Original Equipment NOx (Nitrogen Oxide) Sensors are exhaust gas sensors that detect the nitrogen oxide content of exhaust from diesel engines, and are GM-recommended replacements for your vehicle’s original components. The information from these sensors is used by the engine control module (ECM) to adjust various parameters to help reduce harmful emissions. These original equipment nitrogen oxide sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠ WARNING: Cancer and Reproductive Harm –
| Brand |
ACDelco |
|---|---|
| Part Number (MPN) |
24001917 |
| SKU |
24001917 |
| UPC / GTIN |
193468314908 / 00193468314908 |
| Condition |
New |
| Position |
Upstream |
| Other Names |
24001917 |
| Connector Color |
Black |
| Connector Gender |
Female |
| Connector Shape |
Oval |
| FAQ – Answer 1 |
Yes. A faulty EGR valve will raise the NOx readings at the sensor. |
| FAQ – Answer 2 |
Yes. It will raise emission levels and potentially cause the vehicle to fail an emission test. |
| FAQ – Question 1 |
Can a bad EGR valve cause high NOx readings? |
| FAQ – Question 2 |
Can high NOx content affect emissions? |
| Features & Benefits – Bullet 1 |
Detects the nitrogen oxide content of the exhaust to help optimize emissions |
| Features & Benefits – Bullet 2 |
GM-recommended replacement part for your GM vehicle’s original factory component |
| Features & Benefits – Bullet 3 |
Offering the quality, reliability, and durability of GM OE |
| Features & Benefits – Bullet 4 |
Manufactured to GM OE specification for fit, form, and function |
| Good Maintenance Practices – Section 1 – Bullet 1 |
Use only approved fuel for your application. |
| Good Maintenance Practices – Section 1 – Bullet 2 |
Keep the fuel filter changed at required intervals. |
| Height (in) |
2.6 |
| Length (in) |
5.1 |
| Sensor Wiring Harness Length (in) |
35.9 |
| Signs of Wear & Troubleshooting – Section 1 – Bullet 1 |
Illuminated Malfunction Indicator Lamp (MIL) |
| Signs of Wear & Troubleshooting – Section 1 – Bullet 2 |
Hard or non-starting engine |
| Signs of Wear & Troubleshooting – Section 1 – Bullet 3 |
Rough engine idle |
| Signs of Wear & Troubleshooting – Section 1 – Header |
Signs of wear for nitrogen oxide sensors include but are not limited to: |
| Terminal Gender |
Male |
| Terminal Quantity |
6 |
| Terminal Type |
Pin |
| Weight (lb) |
0.53 |
| Width (in) |
3.1 |
| Wire Gauge Measurement |
7.3 |
| Year |
2022 |
| Make |
Chevrolet |
| Model |
Express 2500 |
| Body & Trim |
Base |
| Engine & Transmission |
2.8L L4 – Diesel |
| GM |
24001917 |
Vehicle Fitment
_1.webp)
_1.webp)
_1.webp)
_1.webp)
