_1.webp)
_2.webp)
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 53056 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
Fits 1962-1974 Mopar B-body without exhaust cutouts in rear bumper. 2.5-inch aluminized steel
62-74 MOPAR B-BODY T-PIPES 1PR.
PIPE 62-74 M
Fits 1962-1974 Mopar B-body without exhaust cutouts in rear bumper. Use Side Inlet/Center Outlet mufflers.
| Brand |
Flowmaster |
|---|---|
| Part Number (MPN) |
15806 |
| SKU |
15806 |
| UPC / GTIN |
700042011612 / 00700042011612 |
| Condition |
New |
| Automotive Item Grade |
High Performance |
| Category |
Exhaust |
| Clamps Included |
No |
| Emission Code |
5 |
| Exhaust Pipe Wall Maximum Gauge |
16 |
| Exit Style |
Dual Rear Exit |
| Finish |
Aluminized |
| Fitment |
Direct Fit |
| Flanged Inlet |
No |
| Grade Type |
Performance |
| Inlet Connection |
Slip-Fit |
| Inlet Diameter |
2.50 |
| Inlet Inside Diameter |
2.50 |
| Inlet Outside Diameter |
2.63 |
| Main Piping Diameter |
2.50 |
| Material |
Aluminized Steel |
| Outlet Connection |
Slip-Fit |
| Outlet Diameter |
2.50 |
| Outlet Inside Diameter |
2.50 |
| Outlet Outside Diameter |
2.63 |
| Overall Length |
65.25 |
| part type |
Exhaust Tail Pipe |
| Pipe Bend Type |
Mandrel |
| Product Type |
Exhaust Accessories |
| Sub Category |
Exhaust and Tail Pipes |
| System Type |
Tailpipe Kit |
| Tapered Outlet |
No |
| Tubing Diameter |
2.50 |
| Welded Bracket Quantity |
0 |
| Welded Hanger |
No |
_1.webp)
_2.25_Outlet_(OD)_-_Walker_Exhaust_(52446)_2.webp)
_1.webp)
_1.webp)
